BAYKEE 120kVA Online UPS for CT Medical Devices
CHP3000 series double conversion online ups 3/3 phase
MP1100 Series 1/1 online UPS 1kVA-30kVA
MP31 series 3/1 phase uninterrupted power source
TYN33 series hybrid solar inverter
HW series outdoor ups & HD series line interactive power supply
HS/HTS series pure sine wave inverter 3/1 phase ups
Automatic voltage regulator(AVR)
Monocrystalline solar panel 310w~335w
Aerospace BAYKEE Lithium-ion battery pack communication backup system and UPS systemMAR.12,2021
Precautions for installation, use and maintenance of Aerospace BAYKEE Online UPSFEB.23,2021
Aerospace BAYKEE SI series solar off grid hybrid inverter power supply solutionJAN.25,2021
Cooperate Again after Ten years! Aerospace BAYKEE Assists Costa Rica to Build An Intelligent National Stadium.JAN.12,2021
What does cooling failure mean to the data center?JAN.04,2021
HTT-P series new generation intelligent module high frequency online UPSDEC.28,2020
Aerospace BAYKEE Online Outdoor UPS AdvantageDEC.16,2020
Reasons for using Aerospace BAYKEE Online UPS power supplyDEC.10,2020
Talk about the UPS lithium battery solution growth spaceDEC.01,2020
Hubei Provincial Bureau of Prisons and Aerospace Baykee create the benchmark for “smart justice”OCT.31,2020
UPS Battery Runtime Choices
When you are looking to install an uninterruptible power supply one of the first to assess is the runtime time you want to build into your UPS installation. Runtime is the amount of time your UPS system will be expected to run for when the mains power fails. The amount of time relies on the choice of a suitably sized energy storage component.
Battery runtimes vary and the most common period is around 5-10 minutes. Most UPS installations protect file servers, some of which can be shutdown within a short period of time (2-3 minutes). This can be automated by installing UPS monitoring software onto the server. When there is a mains failure, the UPS monitoring broadcasts an alarm message to server admins and users and waits for a preset runtime threshold before automatically beginning a shutdown script. If a server installation requires a longer period to shutdown a battery set with a longer runtime may be installed. Battery runtime periods can run to several hours. An alternative is to install a local standby power generator with a built-in fuel tank (diesel or LPG) which can run for 8-24 hours or longer.
It is sometimes difficult to achieve shorter battery runtimes without turning to alternative energy sources. One that is growing in popularity is Super Caps (super capacitors). SuperCaps can only store energy for several milliseconds (around 20-50mS typically) and this can be sufficient to cover very small breaks in the electrical supply. DC flywheels can also provide a similar energy source and similar runtime capabilities to super capacitors. The advantages of both super capacitors and DC flywheels is their recharge rate which is very short; several seconds.
Lithium-ion batteries perhaps provide the most flexibility for the future as they open up other options for UPSinstallations. VRLA batteries are designed for standby mode applications of which uninterruptible power supplies are a typical example. Li-on batteries can recharge far faster and also cope with more rapid and frequent charge/discharge cycles associated with solar energy storage applications and virtual power plants (VPPs).
Lithium-ion batteries are an alternative solution to VRLA batteries and especially for UPS installations. Cost is the main prohibitive factor however, with Li-ion batteries typically costing 30-40% more per UPS installation in terms of CAPEX and initial investment. However, over the lifetime of the UPS system, OPEX may be lower as lithium-ion batteries can have a ten or more years design life. If you install a UPS system with 5-year design life batteries, expect these to be replaced around years 3-4 and years 7-8 for ten-year design life batteries.
There are several choices when it comes to emergency battery energy sources to power your UPS system when the mains power fails. For complete resilience it is as important to consider both the technology required and how to initiate an orderly shutdown of the powered loads if the mains power failure outlasts the runtime (minutes/hours) available from your UPS batteries or other installed energy source.
I hope to help you better understand UPS battery.